If you’re a Country Clipper mower owner, chances are you love your mower. Country Clipper mowers are built tough, but even the most durable machines can run into problems from time to time.
Country Clipper mowers are a great addition to any lawn care arsenal. They’re sturdy, reliable, and usually require little maintenance to keep running.
However, like all machines with moving parts, they can eventually experience problems if not properly serviced.
Common Country Clipper mower problems include engine failure or overheating, excessive vibrations during operation, clogged air filters, broken belts or pulleys, and blocked fuel lines.
Do you have a Country Clipper mower that isn’t working as it should? You’re not alone.
This blog post will explore the topic of the most common Country Clipper mower problems and how to fix them. By proactively addressing these issues head-on, you can keep your mower running like new for years to come.
The Most Common Problems with Country Clipper Mowers
Table of Contents
Country Clipper mowers are built tough and are known for being durable and easy to operate, but like any machine, they could be better; even the best-constructed devices can have problems from time to time.
1. The Engine Won’t Start.
If your engine won’t start, the first thing you should check is the oil level. If you check the oil level and see that it is low, ensure you add more oil until the dipstick reads “full.”
The air filter should be checked next if the fuel level is satisfactory. A clogged air filter will prevent the engine from getting enough air, which will, in turn, prevent it from starting. To clean or replace the air filter, consult your owner’s manual.
If the problem persists, the spark plug is the next thing to check. Remove the spark plug and inspect it for damage. Replace the damaged spark plug with a new one.
To replace the spark plug, first, locate it on the engine (it will be a small metal cap with a wire attached to it). Once you’ve located the spark plug, unscrew it and remove it from the engine.
Replace it with a new one and screw it back in tightly. If the problem persists, there may be an issue with the mower’s fuel line or carburetor.
Finally, if the spark plug looks good and the oil level is average, the issue could be with the fuel line. Inspect the fuel line for cracks or holes. If you find any damage, replace the fuel line with a new one.
2. Engine Stalls
If your engine stalls while you’re mowing, there are a few potential causes.
It may be caused by an improper air filter, a spark plug or ignition coil that needs replacing, or fuel contamination.
First, determine if the air filter needs to be cleaned. A filthy air filter decreases airflow and causes an engine to stall. Clean or replace the air filter as needed.
Next, replace the spark plug and ignition coil. Spark plugs can wear out over time, resulting in misfiring or stalling.
Ignition coils are responsible for producing high voltage to ignite the fuel, and a faulty ignition coil will cause a weak spark that won’t ignite fuel properly.
Finally, check the fuel lines, tank, and carburetor for any signs of contamination. Fuel contamination can lead to engine performance problems such as stalling or hard starting.
Clean or replace clogged parts as needed. If all else fails, it’s possible that your country clipper mower needs professional service to fix the problem.
3. Blade Won’t Engage
If your blade doesn’t engage when you try to mow, there are a few things you can check yourself before calling a service technician.
First, you should check the blade control lever—make sure it’s in the “on” position. If it is, move on to checking the PTO switch (usually located near the seat).
If both things are in order and the blades won’t engage, there may be an issue with the belt or pulleys.
You can check for issues with the belt by looking for fraying or cracks; if you see either, you’ll need to replace the belt. As for pulleys, make sure they’re all in alignment and not wobbling. You can try tightening them up with a wrench if they are.
Also, make sure that all of the bolts that hold the blade in place are tight; if they’re loose, they can cause vibration that prevents the blade from turning properly.
Next, check for any debris blocking the blade from engaging—remove any dirt or grass that may be preventing movement.
Finally, if neither of those solutions solves the problem, then there may be an issue with hydraulic fluid levels—check your owner’s manual to see how to check and add hydraulic fluid if needed.
4. Uneven Cutting
If your mower leaves uneven patches of uncut grass, there are several potential causes—and fortunately, they’re all easy to fix!
First, ensure all four wheels are inflated to the correct pressure as specified in your owner’s manual—uneven tire pressure can cause uneven cutting.
Second, adjust your cutting height—if it is set too high or too low, it can cause patchy results.
Third, ensure that your blade is sharp—a dull blade will tear the grass rather than cut it cleanly and evenly.
Fourth, adjust your wheel alignment as needed—uneven wheel alignment can cause patchy results when mowing your lawn.
Finally, check for any obstructions in the blade’s path, such as rocks or sticks—these can also cause uneven cuts.
5. Mower Won’t Move Forward or Reverse
If your mower seems stuck in one spot and won’t move forward or reverse when you try to operate it, there are a few things you can do before calling a service technician to take a look at it.
First, check that all safety switches are engaged as described in problem 3 above—the PTO switch must be engaged for movement.
Next, check to see if the transmission fluid is at the proper level, and if the drive belt or transmission is showing any obvious symptoms of deterioration, you will need to replace them.
If there doesn’t appear to be any damage, try moving both levers (the one for forward and reverse) slowly from one side to the other—if they get stuck in one position, then that could be causing your problem.
Another potential obstacle is something blocking one of the wheels. Check for any debris that may be preventing the movement of wheels or other mower parts —remove any dirt or grass from the area where the mower is parked.
Finally, ensure that both wheels are properly inflated; if not, they can cause resistance and prevent the mower from moving.
If you cannot troubleshoot or the problem persists, contact your local Country Clipper-certified service center for assistance.
6. Engine Runs Roughly
There could be several different problems causing your engine to run rough.
First, check your spark plugs to ensure they are in good condition and firmly seated in the cylinder head. If they are loose or damaged, replace them.
Next, check your fuel lines to ensure no clogging or blockage preventing fuel from reaching the engine. Replace any damaged or blocked fuel lines.
Third, check the air filter to ensure it isn’t clogged or dirty and see if it needs to be cleaned or replaced.
You should also check for any loose connections in the ignition system.
7. The Engine Sputters and Dies
If your engine starts but then sputters and dies, there are a few possible causes.
First, check the air filter and spark plug. If either of these parts is dirty or worn out, they can cause sputtering and misfires. Clean or replace them as needed.
Next, check for fuel contamination. If you detect any dirt or debris in the fuel lines, tank, or carburetor, clean them out and ensure all parts function properly.
If your country clipper mower has an electric fuel pump, ensure it works correctly. A failing fuel pump can cause sputtering and stalling.
Another possible issue could be a clogged or dirty exhaust system. This can also cause sputtering and stalling as the mower works harder to breathe.
Finally, check for any loose or damaged electrical components in the ignition system, such as the ignition coil or spark plug wires.
If all else fails, it could mean that your country clipper mower needs professional service to fix the problem. If the problem persists, contact an authorized service center for help.
Country Clipper Mower Problems: Are they a deal breaker?
Country Clipper mowers are built tough and designed to last for years with proper care and maintenance. However, even the best-constructed machines can have problems from time to time.
In this blog post, we looked at the most common Country Clipper mower problems and how to fix them without having to call a maintenance specialist every time something goes wrong.
All problems can be easily fixed with a bit of maintenance and care. So, keep minor problems from turning into major issues. Stay on top of regular maintenance, and you’ll have a reliable machine for many years.
By troubleshooting these common problems yourself, you’ll save time and money in the long run!
But the most important thing to remember when dealing with any Country Clipper mower problems is to try and fix a problem yourself only if you are sure what you’re doing.
It’s always best to contact an authorized service center for assistance. This will help ensure your safety and avoid further damage that could be expensive.
With the proper maintenance, your Country Clipper mower will continue to be a reliable and powerful machine for years to come.
We hope this blog post has helped troubleshoot some of the most common Country Clipper mower problems!