5 Most Common Mahindra 1626 Problems

Marvin Tucker Avatar

By Marvin Tucker

Farming Equipment

Published on

Updated on

Mahindra has an excellent reputation for being the brand that sells most tractors worldwide. Yep, more than Kubota, Cub Cadet, and John Deere.

This is no surprise since most users report their Mahindra tractor as being very reliable.

However, some problems are bound to arise when you sell so many compact tractors. Some users report issues with the engine, fuel system, blades, loader, and PTO clutch.

Let’s see what the fuss is all about and what can be done about it.

The most common problems with Mahindra 1626

Since we’re about to go into details about the Mahindra 1626 problems, let’s go briefly over what people like about this tractor.

The Mahindra 1626 boosts a 26hp Mitsubishi engine that feels much more powerful than it is on paper.

Despite its horsepower, many users are surprised by how powerful this compact tractor is.

Indeed, the Mahindra 1626 has also more extensive built than most tractors with the same power. This is evident in its lift capacity, which has greatly surprised most of its buyers.

Despite all the good stuff there is to say about this Mahindra tractor when you have so many machines out there, some users are bound to find a few flaws.

Let’s go over the most common Mahindra 1626 problems and how to fix them quickly.

1. Engine issues

The engine of this lawn mower feels very powerful for its horsepower. However, it has a few electrical issues.

An engine that doesn’t work properly will slow down the lawn mower, including running and blade speed, so you want to have this fixed as soon as possible.

Most engine issues are usually related to the battery. You first want to test it with a load tester or multimeter to see if it’s fully charged and holds said charge.

If the charge is not the issue, you could have some corroded terminals that need a good hand of rust remover.

2. Fuel system issues

It seems that the fuel system of this Mahindra tractor is the part that provokes the most issues for the users.

Although most of what’s under the hood is easily accessible, it can still be hard to troubleshoot some issues, so proceed with caution and remember to use your warranty before making any significant modifications.

Most of these tractor problems can be linked to some fuel system trouble, including some engine problems.

The fuel lines could get clogged, or maybe the fuel filter is full of debris. It could also be that you’re using the wrong type of fuel for your mower, or perhaps the fuel has run stale.

Some users also report strange leaks of unknown origin, so you may want to check the system part per part.

Inspect the fuel lines for cracks or any damage. Replace the fuel filter if it’s clogged – it’s straightforward to do so on this tractor.

Make sure the tank is refilled to the correct level with fresh fluid and change it at least once or twice per month.

These are all things you can do from the comfort of your garage. However, for more severe issues, you should contact your Mahindra dealer.

3. Loader issues

Regarding farm equipment, a loader is one of the things that help the most in managing the property.

The loader on this Mahindra 1626 is pretty impressive, it can lift quite a heavy load without any apparent strain, but this doesn’t mean you should try too hard. Always proceed step by step.

Some users reported that the loader arms started leaking after a few months of work. On top of that, it seems they can’t hold weight as well as they used to, often finding them on the ground after a few minutes.

The problem could be the loader control valve bypassing, the missing main loader arm cylinder, or other valves/cylinders.

To find the leak, take a pipe or a stethoscope and place it against every valve/cylinder. Listen to each component until you hear a swooshing sound. That’s when you found the leak.

Replace the leaking component, and you’re good to go!

4. Blades issues

This is a common issue among lawn tractors in general, so there’s a high chance it might also happen to your Mahindra tractor.

Some users reported problems with the blades, seemingly that they don’t seem to cut as well as they used to when the mower was new.

This is a simple problem with a simple solution. The blades should be sharpened regularly to keep performing optimally.

Of course, that also depends on how often you use the mower deck. However, we suggest sharpening the blades at least twice a month, but it can quickly become a weekly thing if that’s what you need.

If you encounter problems while mowing, such as grass not being cut, make sure you’re working on dry grass. You should never work on wet grass.

5. PTO issues

A few people reported problems with engaging the PTO. When it’s in its disengaged position, the lever won’t move, no matter how hard you try.

Here is a quick step-by-step guide to fix this problem:

  1. Remove the guard around the PTO output.
  2. Remove the bolts of the rear PTO bearing.
  3. Pull the shaft to the tractor’s rear using a large drain pan.
  4. You will see a snap ring in the housing, which prevents the collar from coming out. Please remove it.
  5. Carefully slide the collar shaft assembly out.
  6. Clean both shaft and collar splines.
  7. Make sure the collar slides on the shaft both ways.
  8. Put everything back together.
  9. Pour fluid back into the rear end.

Mahindra 1626 problems: are they a deal-breaker?

Not at all; you will hardly find a compact tractor that has more power and durability than the Mahindra 1626 since its actual power greatly exceeds the model specifications.

Most of the problems you might encounter with this Mahindra tractor are pretty easy to troubleshoot and fix, and they can be prevented with regular maintenance, as with most lawn tractors.

Many users confirm that they would repurchase a Mahindra tractor in a heartbeat, despite the problems they might have encountered.

This says a lot about the high quality of this brand, so if you were going for a Mahindra lawn tractor, don’t let these issues stop you.

5/5 - (5 votes)